First, I do not agree with the "Dry application Only". There isn't any air egress with this version of BL product, and you will get air bubbles applying it dry. Wet application using Rapid Tack works just fine, and gives you a second chance if you need to reposition.
Peeling it dry doesn't really effect the reflective pattern, but it does create small stress, chatter lines that sorta come out with heat (pulled away from the mounting surface, not once mounted).
The reflectivity is higher than Nikolite white reflective which I normally use for my small reflective jobs, and I find this a pretty nice bonus for a budget reflective.
In my testing, when laminated, this product pulls up clean, and doesn't want to rip, however when using this vinyl for a transfer decals it does seem a little tricky to weed. Weeding it non-laminated is surprisingly pleasant. It's crisp and just pulls away clean.
The backside of the vinyl seems to have white carrier. I don't know if it is intended to be a block-out or just the nature of their manufacturing, but I thought was worth noting.
The print quality is good, but I recommend either running a little higher heat, or running the job slower to give it more time to dry before going on the take-up roll. I had a few heavy ink areas of the print that seemed a get little liner embossed from being too wet, but thankfully after it was laminated you couldn't tell.
Like most reflective vinyls, this is directional so plan accordingly.
Overall, I like it, but I think I will spring for the air egress in the future to save on installation time.


